Add Favorite Set Homepage
Position:Home >> News

Products Category

Products Tags

Fmuser Sites

150W RF amplifier circuit for FM transmitter

Date:2015/8/11 10:39:07 Hits:

150w RF amp for 88-108MHz (band 2). The amp has 2 stages using a mosfet for the first stage (blf244) which requires 0.5-1watt of RF input to get about 20watts to drive the final stage (the good old SD1407) which can push nearly 200watts on this design!


This design is more or less broadband however I added 2 variable capacitors after each stage for optimum matching and power output. Make sure the trimmer and the capacitors after the final stage (SD1407) are a high voltage kind (at least 200v).


The power on this amp can be varied by adjusting the bias voltage (using the white pot) to the BLF244 mosfet. I added a zener diode onto the bias supply to protect the (expensive) transistor from too much bias voltage.



150W RF amplifier circuit schematic and PCB layout





Leave a message 

Name *
Email *
Phone
Address
Code See the verification code? Click refresh!
Message
 

Message List

Comments Loading...
Home| About Us| Products| News| Download| Support| Feedback| Contact Us| Service

Contact: Zoey Zhang    Web: www.fmuser.net

Whatsapp/Wechat: +86 183 1924 4009

Skype: tomleequan     Email: [email protected] 

Facebook: FMUSERBROADCAST     Youtube: FMUSER ZOEY

Address in English: Room305, HuiLanGe, No.273 HuangPu Road West, TianHe District., GuangZhou, China, 510620    Address in Chinese: 广州市天河区黄埔大道西273号惠兰阁305(3E)