Add Favorite Set Homepage
Position:Home >> News

Products Category

Products Tags

Fmuser Sites

How to Increase VHF Signal Strength

Date:2015/3/2 12:17:11 Hits:
The signal strength of a very high frequency (VHF) receiver results from the sum of all gains and losses along the path. The signal starts at the transmitter, loses power through the cable to the antenna, gains power in the antenna, but loses power through the air along the path. The receive antenna adds gain, but the cable to the receiver adds loss. Poor or low quality connectors also add loss. The receiver preamp adds gain. To improve signal strength, you must understand all the components involved and know how to install, adjust, repair or replace them.

Instructions


Increase transmitter power. Every transmitter has a legal maximum power that it can transmit. If you have control of the transmit end, maximize the power to the legal limit to improve the receive signal at the opposite end.


Install lower loss cable to your antenna. Depending on the length of your antenna cable and the frequency, changing to a larger diameter cable could reduce the loss by as much as seven or more decibels per milliwatt (dBm) per hundred feet. Lower cable loss means a stronger receive signal.

Tighten, dry, repair or replace defective connectors. Cable connectors can corrode or water can leak into them causing shorts. Connections can work loose with varying temperatures. Defective connections reduce receive signal strength.

Replace antennas with higher gain models. Use the highest gain at the highest elevation above ground allowed for your particular system. Also check for proper polarity and alignment of directional antennas.

Install a low noise preamp. Older VHF systems may have noisy or low gain preamps. A newer, modern preamp can improve signal strength as it comes from the antenna cable.

Tips & Warnings


Always check the FCC regulations for transmitter power and antenna gain and height limits to avoid a possible fine.


Leave a message 

Name *
Email *
Phone
Address
Code See the verification code? Click refresh!
Message
 

Message List

Comments Loading...
Home| About Us| Products| News| Download| Support| Feedback| Contact Us| Service

Contact: Zoey Zhang    Web: www.fmuser.net

Whatsapp/Wechat: +86 183 1924 4009

Skype: tomleequan     Email: [email protected] 

Facebook: FMUSERBROADCAST     Youtube: FMUSER ZOEY

Address in English: Room305, HuiLanGe, No.273 HuangPu Road West, TianHe District., GuangZhou, China, 510620    Address in Chinese: 广州市天河区黄埔大道西273号惠兰阁305(3E)