As the name suggests the dipole antenna consists of two terminals or "poles" into which radio frequency current flows. This current and the associated voltage causes and electromagnetic or radio signal to be radiated.

As seen the antenna consists of a radiating element that is split, normally in the centre to allow a feeder to apply power to it from a transmitter, or to take power from it to a receiver.
The length of the radiating element determines many of the properties of the dipole antenna from its impedance, centre operating frequency, etc. As such this is an important feature of the antenna.

Often the term dipole antenna tends to indicate a half wave dipole. This is by far the most widely used length for a dipole. It forms a resonant circuit which resonates where the electrical length is half a wavelength long - the electrical length differs from the wavelength of the signal in free space because of a number of the effects of the radiating element on the signal and it is very slightly shorter than the signal e/m wavelength in free space..

Although the half wavelength dipole antenna is the most popular, a variety of other formats are also available.

Prev:How to build a 3W FM Transmitter

Next:Medium range transmitter

Leave a message

Message List

Comments Loading...

Products Category

Products Tags

Fmuser Sites

Dipole antenna basics

Leave a message

Message List