What is Relay and How it Works?

Outline What is a Relay?WorkingRelay Contact TypesPoles and ThrowsSingle Pole Single ThrowSingle Pole Double ThrowDouble pole single throwDouble pole double throwRelay ApplicationsWhat is a Relay?A relay can be defined as a switch. Switches are generally used to close or open the circuit manually .Relay is also a switch that connects or disconnects two circuits. But instead of manual operation a relay is applied with electrical signal, which in turn connects or disconnects another circuit.Relays can be of different types like electromechanical, solid state. Electromechanical relays are frequently used. Let us see the internal parts of this relay before knowing about it working. Although many different types of relay were present, their working is same.Every electromechanical relay consists of an consists of anElectromagnetMechanically movable contactSwitching points andSpringElectromagnet is constructed by wounding a copper coil on a metal core. The two ends of the coil are connected to two pins of the relay as shown. These two are used as DC supply pins. Generally two more contacts will be present, called as switching points to connect high ampere load. Another contact called common contact is present in order to connect the switching points.These contacts are named as normally open (NO),normally closed(NC) and common(COM) contacts.Relay can be operated using either AC or DC.In case of AC relays, for every current zero position, the relay coil gets demagnetized and hence there would be a chance of continues breaking of the circuit.So, AC relays are constructed with special mechanism such that continues magnetism is provided in order to avoid above problem. Such mechanisms include electronic circuit arrangement or shaded coil mechanism.WorkingRelay works on the principle of electromagnetic induction.When the electromagnet is applied with some current it induces a magnetic field around it.Above image shows working of the relay .A switch is used to apply DC current to the load.In the relay Copper coil and the iron core acts as electromagnet.When the coil is applied with DC current it starts attracting the contact as shown. This is called energizing of relay.When the supply is removed it retrieves back to the original position. This is called De energizing of relay.There are also such relays, whose contacts are initially closed and opened when there is supply i.e. exactly to opposite to the above shown relay.Solid state relays will have sensing element to sense the input voltage and switches the output using opto-coupling.Relay Contact TypesAs we have seen that relay is a switch. The terminology “Poles and throws” is also applicable for relay. Depending on the number of contacts and number of circuits it switches relays can be classified.Before we know about this classification of contacts we have to know the poles and throws of a relay switch.Poles and ThrowsRelays can switch one or more circuits. Each switch in relay is referred as pole. Number of circuits a relay connects is indicated by throws.Depending on the poles and throws, relays are classified intoSingle pole single throwSingle pole double throwDouble pole single throwDouble pole double throwSingle Pole Single ThrowA single pole single throw relay can control one circuit and can be connected to one output. It is used for the applications which require only ON or OFF state.Single Pole Double ThrowA single pole double throw relay connects one input circuit to one of the two outputs. This relay is also called as changeover relay.Though the SPDT has two output positions, it may consist of more than two throws depends on the configuration and requirement of the application.Double pole single throwA double pole single throw relay has two poles and single throw and it can be used to connect two terminals of a single circuit at a time. For example, this relay is used for connecting both phase and neutral terminals to the load at a time.Double pole double throwA DPDT (double pole double throw) relay has two poles and two throws for each pole. In motor direction control, these are used for phase or polarity reversal.The switching action between contacts for all these relays is performed when the coil get energized as shown in figure below.Relays can be classified into different types depending on their functionality, structure, application etc. Learn about different types of relays . Classification of Relays.Relay ApplicationsRelays are used to protect the electrical system and to minimize the damage to the equipment connected in the system due to over currents/voltages. The relay is used for the purpose of protection of the equipment connected with it.These are used to control the high voltage circuit with low voltage signal in applications audio amplifiers and some types of modems.These are used to control a high current circuit by a low current signal in the applications like starter solenoid in automobile. These can detect and isolate the faults that occurred in power transmission and distribution system. Typical application areas of the relays includeLighting control systemsTelecommunicationIndustrial process controllersTraffic controlMotor drives controlProtection systems of electrical power systemComputer interfacesAutomotiveHome appliancesRelated Posts:Classification of RelaysTemperature Controlled Switch using LM35, LM358Clap Switch Circuit for Devices using 555 and 4017Working of Transistor as a SwitchAutomatic Street Light Controller Circuit Using…Arduino EEPROM Tutorial | How to use Arduino's…

Leave a message 

Message List