Due to high frequencies used, Waveguides rather than RF coaxial cables are used to connect Microwave Radios, Antennas and Couplers. Matched and correct size and dimension of Waveguide is essential for all items in the Microwave link.

What is a Waveguide?

A waveguide is an electromagnetic feed line that is used for high frequency signals. Waveguides conduct microwave energy at lower loss than coaxial cables and are used in microwave communications, radars and other high frequency applications.The waveguide must have a certain minimum cross section, relative to the wavelength of the signal to function properly. If wavelength of the signal is too long (Frequency is too low) when compared to the cross section of the waveguide, the electromagnetic fields cannot propagate. The lowest frequency range at which a waveguide will operate is where the cross section is large enough to fit one complete wavelength of the signal.

Rectangular, Circular and Double Rigid
Geometrically speaking there are three types of waveguides – Rectangular Waveguides, Double Rigid Waveguides and Circular Waveguides. The tables below will give you details on the various waveguide sizes and their properties.

Note:
●The “WR” designation stands for Rectangular Waveguides
●The Number that follows “WR” is the width of the waveguide opening in mils, divided by 10. For Example WR-650 means a waveguide whose cross section width is 6500 mils.
●The waveguide width determines the lower cutoff frequency and is equal (ideally) to ½ wavelength of the lower cutoff frequency.

Double-ridge waveguides are rectangular wagevuides with two ridges protruding parallel to the short wall. This increases the E-Field in the waveguide improving performance.

Prev:V-Band 60GHz Millimeter Wave MMW Technology

Next:Rec. ITU-R PN.837-1

Leave a message

Message List

Comments Loading...

Products Category

Products Tags

Fmuser Sites

Microwave Waveguide Sizes & Dimensions

Leave a message

Message List